Product Information of CTECHi motherboard cmos battery series for instrument
Item: CR1225 3.0V 48mAh LiMnO2 button Battery
Voltage Nominal: 3.0V
Capacity Nominal: 48mAh
Operating Temperature: -20+60℃
Certification: CE, CCC, CQC, UL
Availability: OEM, ODM, OEM/ODM
The CR1225 battery is a lithium-ion button battery，its diameter is 12mm，thickness is 2.5mm，It is the same as the voltage of other batteries of the same type, it is 3V. Capacity is 48mAh，
CR1225 button battery negative Solder piece
CR1225 button Battery positive Solder piece
CR1225 button battery negative Solder foot
CR1225 original battery
CR1225 unprocessed battery
CR1225 button battery Discharge curve
The CR1225 is a miniature lithium-ion button battery that is compact, lightweight, and high-capacity and high-voltage. It can meet the power needs of small electronic components and small electronic products.
CR1225 lithium button battery can be used on e-books
CR1225 lithium button battery can be used on Digital Watch
CR1225 lithium button battery can be used on Motherboard
Solder Processing Solution
Our company also has the following CR1225 battery soldering solutions CR1225/1HF, CR1225/1VC,Each solution has a different application, and customers can choose the corresponding processing method according to the application.
According to CTECHI Labs, the energy costs of operating a global data and communications network will soar from $40 billion in 2011 to $343 billion in 2025. wow! This amazing growth has been driven by the continued rapid growth of traffic.In the face of such a huge increase, cutting communications consumption has become a priority for communications service providers. But how? How can energy costs be reduced while integrating new technologies and maintaining optimal network performance?How can I save energy?Today's base station sites are crowded with technology that requires the management of complex hardware. As energy demand increases, DC cables need to become thicker to carry the increased current. Not only do more space needed, but installation became more difficult, copper cable losses increased, and distribution points in cables generated more energy waste. All of this increases costs, which CSPs try to avoid when upgrading sites.Bottom line impactSavings per site are considerable:Save on hardware: Power wiring costsSave installation: Smaller AC cables and auxiliary equipment make installation easier and fasterIncreased flexibility in site configuration planning: support for long-running feeder-free sitesMore energy-efficient solutionsUniversal Energy Solutions: Also available for small cellular sites (using AC power directly) and other AC radios that may be used in the futureOther obvious benefits include reduced mast loads (wind and mass), fewer cable slots (existing slots are usually full), significantly lower losses in AC power cords than in DC power supplies, the use of existing backup batteries, and space for modernization.
How CTECHI Home Energy Storage System worksSeamless communication across all energy systemsUse cloud-based software to connect solar energy to the building's current energy system, strategically turn certain systems on and off when needed (e.g., heating, lighting), and get power from the solar system at the most appropriate time to reduce the cost and overhead of both types of power requirements.Optimize building loadsCTECHI Home Energy Storage System interacts actively and dynamically with building RTUs, solar systems, batteries, lighting, etc. to reduce peak demand and usage time costs. Use each system only if the building administrator and system software deem it necessary. All of this is controlled in a user-friendly remote access control panel. Advanced machine learningCTECHI Home Energy Storage System learns and adapts to how occupants in buildings use it to adapt to patterns and trends observed over time, with the goal of continuously reducing energy consumption. Factors such as building utilization, solar production trends and weather patterns are also used to predict the future energy needs of buildings.Learn more about battery energy storageWhat is battery energy storage?Battery energy storage systems work with solar panels (or other renewable sources, such as wind turbines) to store power generation for optimal use at peak times. These commercial batteries are rechargeable and perform more advanced functions such as peaking and load transfer.Peaking involves reducing energy consumption during peak hours of one day (or even a year), while load transfer spreads power consumption from one time to another. Both are huge ways to reduce utility bills and can be done using battery storage systems.How battery energy storage worksPeaking and load transfer can be done in a simple process. First, batteries will be charged by collecting clean renewable energy from solar, wind or other renewable sources. The advanced algorithms in the battery system then coordinate when to allocate energy to the building based on past usage history and other factors, such as weather conditions or time of day. Finally, when your device uses the highest energy, the energy stored in the battery is releasedKey benefits: Storage of on-site power and reduced reliance on the gridExcess energy generated by renewable energy systems, such as solar panels, can be stored in batteries and used later, reducing the organization's dependence on utility providers. This, in turn, reduces your electricity bill.Use batteries for disaster recoveryThe battery allows your organization to have backup power in case of emergency. If your power supply is down, the battery is the ideal solution to ensure temporary power supply. This is especially important for companies with large server space or higher technology dependencies.
Echelon utilization refers to the continuous use process in which a used product has reached the original design life, and then its functions are fully or partially restored through other methods, and this process belongs to the basic same-level or degraded application. " Escalation utilization " and " gradient utilization, ladder utilization, degraded utilization " are the same in concept, but cannot be regarded as renovation use.BackgroundIn the development of human society, many tools, equipment, and products are often discarded and discarded as garbage after being used. All waste does not mean that its function is completely lost or can no longer be used. With continuous development and changes in human history, people's life and production methods have also undergone tremendous changes. Different social divisions of labor, differences in national conditions and tribes, individual self-foundation and unbalanced growth, and the formation of class attitudes make people There is an irreversible gap with people. From ancient times to modern society, this cycle of living and multiplying has never stopped, and it is precisely in this social context that all matter has been given birth and rebirth of life. In other words, in the common evolution process of human beings, it has been accompanied by the old and new cyclical habits, which is called the development background of the social theory of gradient utilization.In a modern civilized society, with the rapid development of machinery, electronics and information society, more and more waste materials and commodities are produced. Many people are regarded as garbage products, in the view of other regions or consumers, However, it is an undesirable and easy-to-use thing, so recycling is also a common call for global promotion of low-carbon and environmentally friendly development, and cascading utilization is a theoretical branch of this large recycling concept. Known as the front-end product of recycling and high-quality production methods . Application field( 1 ) Military industry: The use and maintenance costs of military equipment (such as aircraft, tanks, armored vehicles, heavy guns, etc.) are huge. Most of the countries have destroyed military equipment that has been eliminated. In the national economy, the core components of this military equipment were dismantled and then properly packaged for civil historical exhibitions, which was also the beginning of the gradient utilization in modern times;( 2 ) Lighting field: The lighting equipment also comes from military equipment, and its original design is used in the field of the military battlefield can no longer be applied, many lighting fixtures are demolished and used in civilian lighting field;( 3 ) Battery field: Automotive lead-acid batteries are widely used for home energy storage (new energy vehicle power batteries mostly use nickel series and lithium series, and the gradient use of these power batteries is known as the key development object);( 4 ) Automobile field: After being eliminated, many urban vehicles often do not enter the dismantling and utilization link, but are transferred to the mainland and remote areas for degraded transportation. This is also a typical example of gradient utilization, but due to safety There is also a huge controversy about hidden dangers;( 5 ) Machine tool parts and other fields: Many used machine tool parts are used to make Iron Man and other artworks for visiting exhibitions, and the gradient utilization value created by them is still considerable;( 6 ) Other fields.Difference from renovationThe core of echelon utilization is the need to perform a series of complex testing and analysis on the original product, scientifically judge its life cycle value and reusability, to design a gradient grade and application field that is consistent with the product.The use of refurbishment is often a very simple way or convenient situation to repair and cover up the original product, and then sell it to the end market as a new product. There is no scientific detection analysis and evaluation in the refurbishment process, and there is no gradient design and application field Analysis so that the re-use of the product will bring potential risks in all aspects.Therefore, there is a huge difference between the use of gradient and the use of renovation. The original intention of the country in the use of gradients is to promote the technology based on the concept of being scientific and reasonable and making the best use of it, rather than encouraging fraud.Social SignificanceThe greatest social significance of the cascade utilization is to maximize the use of products, and its design cycle has been extended, creating economic value for the society, but also reducing waste emissions for the society. It is a cyclic, low-carbon production and lifestyle that modern society should vigorously promote.Technology Typical ApplicationAlthough cascade utilization has a distant development background, it is an emerging thing. Because to achieve gradient utilization must rely on the development and progress of science and technology to complete. The most successful case of gradient application technology development at home and abroad is the car power battery.Compared with traditional mobile phone and laptop batteries, automotive power batteries have more energy. In terms of the original design life cycle, there is no uniform standard in the world; at the same time, because the application of the electric vehicle market has not yet reached the level of popularity, so The process of its production and application has brought many scrapped and unqualified power batteries. These batteries are often unqualified or fail to meet the energy requirements during the use of automobiles. However, these large-capacity power batteries can often be used in many fields, such as electrical engineering and electrical lighting.In the gradient use of technology, the domestic Academy of Sciences and other research institutes and enterprises in the research, including the elimination of the product life cycle diagnosis, recyclability gradient design, physical indicators of detection, comprehensive performance testing. China has a provincial electric vehicle battery recycling-oriented research engineering center and academician workstation located in Guangdong Province.
LiFePO4 batteries are the safest high-ratio energy batteries in the lithium-ion battery family. The discharge voltage of LiFePO4 battery is very stable, generally 3.2V, the voltage changes rapidly in the later stage of discharge (mainly refers to the remaining 10% capacity), and the cut-off voltage is generally 2.5V. Ambient temperature, especially low temperature, will affect the discharge capacity of LiFePO4 battery: the discharge capacity of -20 ℃ is 45% of the normal temperature capacity, -10 ℃ is 65% of the normal temperature, -5 ℃ is 80% of the normal temperature, 0 ℃ is 90% of the room temperature, 0 ℃ to 20 ℃ of the discharge capacity change is very small. The low temperature performance of LiFePO4 battery is better than that of lead-acid battery.Installation considerations.Although the lithium phosphate battery at the factory positive and negative plates have been charged and discharged, but if the installation date of LiFePO4 battery from the factory date is far away, after a long period of self-discharge capacity will inevitably be lost. In addition, LiFePO4 battery at the factory charge is generally 60%, the initial installation should be recharge the battery pack. Due to the difference in self-discharge of the unit battery, the voltage imbalance at each end of the battery may occur. The open circuit voltage must be measured before the LiFePO4 battery pack is installed, the open circuit voltage difference should not be greater than 50mV, and the battery test should be done and recorded. With false load, the battery pack can be pressed 0.1C10 and 0.2C5 capacity test, this test does not need to be connected to the battery management system, only the battery pack series, but the discharge process must strictly detect the battery unit voltage, the total voltage of the battery per hour, discharge current, battery unit voltage measurement and recording. Battery in the discharge after every 10min detection discharge battery unit voltage low battery, if there is a battery end voltage to 2.5V immediately stop discharge, calculate the actual battery discharge capacity and battery rated capacity is consistent, if basically consistent to prove that the battery discharge test qualified, and then charge the battery. If discharge to termination voltage, the difference between the capacity discharged by the battery pack and the rated capacity is greater than 15%, indicating that there may be a problem with the factory capacity of the battery pack, the manufacturer should be promptly contacted to deal with.Influencer factors.1. Effect of temperature on LiFePO4 batteries.The effect of temperature on LiFePO4 batteries is much smaller than that of lead-acid batteries, especially in the case of discharge. For temperature characteristics testing of two batteries of the same size, LiFePO4 batteries have a 20% higher capacity than sealed valve-controlled lead-acid batteries. Due to the electrochemical properties of the lithium phosphate material, the low-temperature charging performance of the battery is slightly worse, the charging temperature is higher than 0 ℃, otherwise the irreversible capacity of the battery will increase with the decrease of temperature. LiFePO4 batteries can still be recycled and discharged in an environment of about 55 ℃.2. Effect of intermittent floating charging on LiFePO4 batteries.Since the electrolyte of the lithium phosphate battery is an organic liquid, and lithium metal is very active, the battery must be sealed. The battery produces almost no gas under normal charge and discharge conditions, and even if the battery is intermittently charged for a long time, there will be no higher pressure inside the battery. In addition, the backup power supply of the communication base station is in the floating charge state for a long time, and the voltage of the battery is about 3.65V for the long time. This voltage is stable for both the battery plate and the electrolyte, so LiFePO4 batteries are ideal for communication base stations.BMSCharge and discharge, extrusion, needles and other abuse conditions are still safe, but will have a great impact on the cycle life of the battery. The production process of LiFePO4 battery is more complex, the consistency difference of single battery will be longer than the sealing valve-controlled lead-acid battery, which leads to the rapid rise of the voltage of individual unit batteries in the later charging period of the battery pack, coupled with the communication base station long-term unattended state, not easy to find in time, resulting in a short life of lithium phosphate battery pack or damage phenomenon. In order to avoid the above phenomenon, BMS is required to ensure the safety and reliability of the battery. BMS is a core component of battery protection and management, not only to ensure the safety and reliability of the battery, but also to give full play to the performance of the battery and extend its life. As a backup power for communication, BMS acts as a bridge between switching power supplies and batteries. BMS's safety management mode is critical to battery safety and includes data acquisition units, computing and control units, balancing units, control execution units and communication units.LiFePO4 batteries should be used in support of switching power supplies.In view of the characteristics of the above-mentioned LiFePO4 battery, in the selection or setting of power supply equipment, only the floating charging pressure or the average charging voltage is adjusted to the charging voltage required for the LiFePO4 battery. It should be noted here that, as opposed to sealed valve-controlled lead-acid batteries, the charging process of LiFePO4 batteries is not a float-charged charging mode, as long as the charging voltage required to charge the lithium phosphate battery can be met. Iron phosphate lithium battery even if the long-term average charging state, due to its own protection function, battery performance will not change, LiFePO4 battery in this regard is very obvious advantages. In addition, the real-time monitoring of switching power supply, regulatory limit flow, automatic conversion of floating charge, battery temperature compensation, intelligent management and secondary power down and other functions of the setting can directly refer to the lead-acid battery settings, only need to increase the charging voltage to the LiFePO4 battery required charging voltage. For example, a mobile base station uses 48 to 300Ah LiFePO4 battery two sets, in order to replace the battery in order to ensure the safety of power supply, two sets of LiFePO4 battery offline testing. After testing the total voltage of each set of batteries, adjust the switching power supply DC supply voltage corresponding to each other, respectively, two sets of LiFePO4 battery access system to supplement the power. At this point, the switching power charging voltage is set to 56.4V and the charging current is limited to 30A per set. The initial charging current of the two battery packs is 29A and 31A, respectively, as the battery pack voltage increases, the charging current will decrease accordingly, when the battery pack voltage and switching power supply charging voltage is very close, the charging current of the battery pack is gradually reduced to 0, at this time the battery pack BMS played a protective role, the charging system through the BMS and battery disconnect, battery charging is complete. When fully charged, the two sets of batteries are stationary 8h for discharge testing. In order to test the high current discharge capacity of the two battery packs, 0.2C5 current discharge is used, i.e. 120A. The total discharge time is 5h, the current shown in the smart load cabinet display is basically 120A, the battery pack released capacity of 600Ah. LiFePO4 battery released 100% of the rated capacity, so the battery pack released the capacity to fully meet the rated capacity requirements, the entire discharge process intelligent false load is very stable.Test of LiFePO4 battery.(1) The test of the discharge of sex.According to the operating characteristics of LiFePO4 battery, the measurement of battery end voltage should not only be in the intermittent floating state, but also in the discharge state of detection. The voltage at the end of the battery is an important parameter to reflect the working condition of the battery. Due to the presence of the added voltage, the voltage of the battery end voltage is measured in the intermittent floating charge state, and its voltage can easily create the illusion. Therefore, the battery should be regularly carried out on a regular basis with a checked discharge test, released 30% to 40% of the actual capacity of the battery, and the battery monitoring system for real-time testing and printing archive of the battery pack, while checking the battery connection strip contact, the battery connection strip is loose to fasten, to ensure the safe and stable operation of the battery.(2) Quantity discharge test.In the current communication power supply system, switching power supply and LiFePO4 battery for the side-by-side intermittent floating charge power supply, so the battery pack can not be separated from the power supply system, can not be separated to the battery capacity test. Due to the low environmental temperature requirements of lithium phosphate battery, long battery life and so on, the battery pack can be tested every 3 years, the battery after 6 years of annual capacity test, requiring more than 80% of the released capacity is qualified. In general, such tests are carried out under conditions with actual load (or actual load plus false load). In order to ensure the safe and reliable supply of dc power in this case, the diesel generator set should be inspected to ensure that the diesel generator set is properly powered, and the discharge multiple of the battery pack is determined to meet the discharge rate of 3 hours, 5 hours or 10 hours for the load of the DC power supply system. The 3-hour rate discharge current is 0.25C3, the 5-hour rate discharge current is 0.168C5, and the 10-hour rate discharge current is 0.10C10, preferably at an ambient temperature of about 20 ℃ at a capacity test of 10 hours. Because the lithium phosphate battery has BMS protection, the floating charging voltage of the switching power supply is set to 45V when the battery capacity test is carried out, and then the AC input of the switching power supply is disconnected, and the discharge current of the battery is detected with the DC clamp type meter to ensure the safety of the base station power supply.Maintenance of LiFePO4 batteries.(1) Environmental requirements.According to the environmental requirements of the battery, room temperature should not exceed 55 ℃, it is recommended that the ambient temperature should be kept at 0 to 55 ℃;(2) Precautions.LiFePO4 batteries of different sizes and models are prohibited from using in the same DC power supply system, and batteries of different degrees, old and new, should not be mixed in the same DC power supply system. If there is a dynamic and environmental centralized monitoring system, the total voltage, current, unit voltage and temperature of the battery pack should be monitored in real time through the dynamic environment centralized monitoring system and BMS. At the same time, through the battery monitoring device to understand the battery charge and discharge curve and performance, regular measurement, timely detection of faults and treatment.(3) Check the item.The pole column and connecting strip of LiFePO4 battery should be checked frequently for looseness, damage, deformation or corrosion, looseness at the connection, damage, leakage and deformation of the battery housing, abnormal temperature rise at the battery and connection, according to the manufacturer. Provide technical parameters and on-site environmental conditions, check whether the battery pack and unit voltage meet the requirements, detect whether the charging current when the battery pack is intermittently charged is within the required range, and detect whether the battery pack charging limit setting, low voltage alarm, high voltage alarm setting is correct. If there is a secondary power-down device in the DC power supply system, the secondary down-voltage setting should be checked correctly.(4) Voltage requirements.The intermittent charging voltage of LiFePO4 battery is generally set to 3.60 to 3.76V for single battery and 56.4V for battery pack. Measure the battery pack voltage and the end voltage of the unit battery on a monthly level.