Yadea TTFAR Graphene 3rd Generation Battery, Breakthrough Industry New Technology

In recent years, the rapid development of battery technology has led to a rapid increase in the range of electric vehicles. The emergence of Yadea's graphene battery not only solves the anxiety of the range, but also solves the power problem of two-wheel electric vehicles in one fell swoop. The industry’s many years of bottlenecks in the industry have been 'difficult to balance the range and power'. From the first to iterative Yadea technology to upgrade the battery life. It is understood that Yadea developed the Yadea graphene battery for the first time in 2019 and mastered a number of patented technologies after more than 1,000 experiments. In the Yadi Guanneng 2.0 series launched in early 2021, Yadi once again launched the upgraded TTFAR graphene 3rd generation battery, which has made the battery technology of two-wheel electric vehicles a big step forward. It is reported that the cycle life of Yadea TTFAR graphene 3rd generation battery reaches about 1,000 times, which is three times that of ordinary batteries. Zhou Chaoyang, vice president of Yadea and director of Product Technology Research Institute, once said that the TTFAR graphene 3rd generation battery The capacity almost reaches the upper limit of the battery with the same volume. This also allows the Yadi Guanneng 2.0 series equipped with TTFAR graphene 3rd generation batteries to truly realize 'one charge, double the run'. Yadi Guanneng 2.0T5 On the other hand, the Yadi Guanneng 2.0 series has not only improved battery life, but also improved charging efficiency. This is due to the strong conductivity of the TTFAR graphene 3rd generation battery. Wei Shifu, director of the Power Energy Center of Yadea Product Technology Research Institute, pointed out that the TTFAR graphene 3rd generation battery has large capacity and strong conductivity, and it can be fully charged in 3 hours with the TTFAR fast charge charger. It is based on such battery characteristics that Yadi Guanneng 2.0 series has greatly improved the battery life and charging efficiency. Yadea's BMSTTFAR graphene battery manager, the real battery life can see that the long battery life in the ideal state is excellent, but the performance of the electric vehicle is also important. Especially in the car models using ordinary lead-acid batteries, sometimes 'seeing the full charge, but turning the handle to the bottom directly' situation sometimes occurs. In response to this problem, Yadi Guanneng 2.0 series specially added the self-developed BMSTTFAR graphene battery manager. Through the BMS system, the display error of the battery can be controlled within 8%, allowing users to accurately grasp the battery, arrange travel reasonably, and do not miss the charging time. Yadi Guanneng 2.0T5 In addition, thanks to the extreme temperature resistance of Yadi’s graphene battery, the TTFAR graphene 3rd generation battery can be used normally at a temperature of -20°C to 55°C, which is a one-time solution. The extreme influence of the low temperature in the north and the high temperature in the south on the battery life performance allows users to have a good riding experience whether in the cold winter or the sweltering heat. From the first Yadea graphene battery to today’s TTFAR graphene 3rd generation battery, Yadea has always maintained a leading position in technology, and will inevitably solve more electric vehicle technical problems in the future. The development trend of the industry provides higher-end riding solutions for global users.