loading

CTECHI is an expert in battery solutions, specializing in ODM, OEM, and SKD for energy storage, motive power, and consumer batteries.

Working steps of lithium battery protection board

The lithium battery protection board is mainly composed of protection IC (overvoltage protection) and MOS tube (overcurrent protection), which is used to protect the safety of lithium battery cells. Lithium batteries have been widely used because of their large discharge current, low internal resistance, long life, and no memory effect. Today, Guoren Chuangfa will learn the working steps of lithium battery protection board with everyone.

1. Voltage protection capability

Overcharge protection: the protection board must have the ability to prevent the cell voltage from exceeding the preset value. Overdischarge protection: the protection board must have the protection against the bottom of the cell voltage The ability to be at a preset value.

Second, current capability (over-current protection current, short-circuit protection)

As a safety protection device for lithium batteries, the protection board must be in the normal state of the equipment It can work reliably within the working current range, and it must act quickly when the battery is accidentally short-circuited or over-current, so that the battery cell can be protected.

Three, on-resistance :

Definition: When the charging current is 500mA, the on-resistance of the MOS tube. Due to the high working frequency of communication equipment, the low bit error rate required for data transmission, and the steep rising and falling edges of the pulse train, the current output capability and voltage stability of the battery are required to be high, so the MOS switch of the protection board is turned on The time resistance should be small. The single-cell battery protection board is usually less than 70mΩ. If it is too large, it will cause the communication equipment to work abnormally, such as the sudden disconnection of the mobile phone during a call, the phone cannot be connected, and noise.

Four. Self-consumption current

Definition: IC working voltage is 3.6V. Under no-load condition, the working current flowing through the protection IC is generally Very small. The self-consumption current of the protection board directly affects the standby time of the battery. It is usually stipulated that the self-consumption current of the protection board is less than 10 microamps.

Five, mechanical properties, Temperature adaptability and antistatic ability

The protection board must be able to pass the vibration and impact tests specified by the national standard; the protection board can work safely at -40 to 85 degrees, and can withstand the non-contact ESD static test of ±15KV.

The promotion of lithium battery industry chain enterprises, lithium grid (li-b.cn) welcomes contributions.

Share to:

GET IN TOUCH WITH Us
recommended articles
Services 200 FAQs Case
ElonMusk, the hottest geek in the automobile industry, this madman in the scientific world is almost paranoid about technology and won the name of the real Iron Man.
The large-scale development of lithium-ion batteries puts forward new requirements for production and manufacturing.
On the eve of the explosion of the global new energy industry, power lithium battery manufacturing moved from GWh to TWh.
Tesla's official website updated its Model Y promotional page on January 1, announcing that the Model Y pricing has been significantly reduced.
Recently, due to the strong market demand, the power battery industry chain has 'exploded ordersAccording to the company's data, as of January 2021, there were 18,000 power battery-related companies in my country.
According to foreign media reports, electric vehicles are driven by rechargeable lithium-ion batteries (LIb), but at present, people have not fully understood and perfected lithium-ion batteries.
At the Frankfurt Motor Show, Honda also announced the mass production version of HondaE, and also announced the two-way connection system HondaPowerManagerPrototype for EVs and smart grids.
Introduction: An electric car company and a business park operator in Florida have pledged to invest up to US$1 billion in the planned plant in Chonburi, starting with the 1GWh portion that may take shape in 2023.
The topic of electrification and national geopolitics sounds very grand at first, and you can write a long and long narrative, of course, you can also make a long story short.
With the limelight of new energy vehicles, CATL has become one of the most shining companies in this tuyere.
no data
no data
no data
Copyright © 2025 CTECHI | Sitemap | Privacy Policy
Customer service
detect