loading

CTECHI is an expert in battery solutions, specializing in ODM, OEM, and SKD for energy storage, motive power, and consumer batteries.

electric car components

You decided to build an electric car.
There are a wide range of electric vehicle components to choose from.
Understanding these components and their specific uses is the first part of building your own.
Below is a list of the most common parts for home electric vehicle manufacturers to build a car that meets the needs of ordinary drivers.
An electric car needs a motor.
The shape and size, weight and price of the motor vary.
They can use AC or DC power supplies.
Budget builders can choose to use an electric motor in an old forklift or elevator system.
There are also many electric cars --
Specific motors that can be purchased separately or as part of the kit.
You need to choose the motor that suits your performance and budget needs.
The purpose of the motor controller is to adjust the speed of the motor rotation.
For example, if 120V is applied directly to the motor, it will run at full speed.
There needs to be a way to adjust the output of the motor, which is exactly the purpose of the motor controller.
It allows the motor to run at any speed between zero rpm and maximum rpm.
This part can also be salvaged from a forklift or golf cart.
The solar tank box is a small part of the cable connected to your stock solar box.
When you press the throttle, the pot box sends a signal to the controller that corresponds to the pressure size of the pedal you step on, and then the controller sends the appropriate power to the motor.
The adapter board connects the motor with the inventory transmission.
These can be purchased for any common modified vehicle. Most EV-
The specific motor has a standard bolt pattern, so most Adapter boards can work with most motors.
If you use the motor on the forklift you need to customize an adapter board and of course you can do it yourself if you are a decent manufacturer.
This is basically a highvoltage relay.
When you turn on the key, it connects your battery pack to the controller.
When the current is too large, the FuseA fuse will fuse and power off.
There needs to be a manual switch (or more)
The main battery pack is disconnected manually.
This way, if all the other methods fail, you can manually disconnect the power and park safely.
There are many different types of batteries to choose from.
The type of battery you choose will affect your performance and mileage.
There are many different types of chargers for the charger, and the charger you need depends on the battery you use.
The DC/DC converter bears the main (traction)
Battery pack and reduce it to 12 V, thus keeping the 12 V battery charged.
Electric cars still need 12v batteries to power all the lights, sound, speakers, etc.
Keeping this battery charged can also be achieved in other ways.
Some electric car manufacturers use an AC generator running from the motor, while others use a separate 12v charger to charge the battery.
GaugesYou need to know what\'s going on under the hood and that\'s where your meter comes from.
The most basic electric vehicle is built with high usage
Voltage ammeter and Voltmeter (
Traction package voltage)
And low voltage instruments (12V system).
Although no heater is needed to drive the car, it is a creature comfort that we are all used.
Since the stock heaters of any petrol vehicle use the heat generated by the gasoline engine to heat the cabin, we need to come up with other ways to bring the heat into the vehicle.
There are several ways to do this. Ceramic components-
This is the most common way to heat electric cars.
The ceramic elements are placed inside the heater core or inside the heater box and supplied with the traction package voltage.
The ceramic element basically becomes the heater core and the system will work properly in addition to the switch required to open the element. Fluid Heater-
The fluid heater uses the stock heater core and cycles the fluid in it like the stock system.
The fluid is heated by electrical elements and cycled through the heater core through a small pump. Space Heater-
Small ceramic space heaters with AC power inverter can be used in the car.
However, AC inverters are very expensive, which is often not an economical and effective way to heat electric vehicles. Heated Seats-
Nowadays, the heated seat covers are widely used and a lot of heat is released.
The air inside the car will remain cold, but a heated seat will make you feel warm.
Heat the car before use
Before use, simply place a space heater in the car for a period of time.
It will heat the car and keep the temperature long enough in a short period of time.
These are the main components needed to make an electric car at home.
Other parts are needed along the way, but these are the main components.

GET IN TOUCH WITH Us
recommended articles
Services 200 FAQs Case
ElonMusk, the hottest geek in the automobile industry, this madman in the scientific world is almost paranoid about technology and won the name of the real Iron Man.
The large-scale development of lithium-ion batteries puts forward new requirements for production and manufacturing.
On the eve of the explosion of the global new energy industry, power lithium battery manufacturing moved from GWh to TWh.
Tesla's official website updated its Model Y promotional page on January 1, announcing that the Model Y pricing has been significantly reduced.
Recently, due to the strong market demand, the power battery industry chain has 'exploded ordersAccording to the company's data, as of January 2021, there were 18,000 power battery-related companies in my country.
According to foreign media reports, electric vehicles are driven by rechargeable lithium-ion batteries (LIb), but at present, people have not fully understood and perfected lithium-ion batteries.
At the Frankfurt Motor Show, Honda also announced the mass production version of HondaE, and also announced the two-way connection system HondaPowerManagerPrototype for EVs and smart grids.
Introduction: An electric car company and a business park operator in Florida have pledged to invest up to US$1 billion in the planned plant in Chonburi, starting with the 1GWh portion that may take shape in 2023.
The topic of electrification and national geopolitics sounds very grand at first, and you can write a long and long narrative, of course, you can also make a long story short.
With the limelight of new energy vehicles, CATL has become one of the most shining companies in this tuyere.
no data
no data
no data
Copyright © 2025 CTECHI | Sitemap | Privacy Policy
Customer service
detect